Meggitt Sensing Systems

Meggitt Sensing Systems

PCC421V series

PC420 Model Chart Category Comparison Table Enlarge Image

The output of the PCC421V series is proportional to velocity. An output of 4 mA indicates a level of 0 ips or no vibration present. A full-scale reading of 20 mA?s indicates that the full scale range of vibration is present.

The new PCC421 / PCC423 series was optimized to be lighter weight and have a lower profile, in order to provide more clearance in small spaces. They operate at a maximum temperature of 105° C (221° F), a significant increase over other 4-20 mA vibration sensors on the market. These sensors can be ordered with either a 1/4-28 UNF or M6 captive mounting screw.

The PCC421V series is available with a traditional MIL-C-5015-style connector as well as the popular M12 connector. To simplify ordering for international customers, PCC421V sensors ordered with the M12 connector will be shipped with the M6 captive screw, unless otherwise specified.

Benefits

Choice of output: peak or RMS, permits you to choose the sensor that best fits your industrial requirements
Provides continuous trending of overall machine vibration
Helps notify of impending equipment failure

Features

Small, lightweight, industrial high temperature
Peak or RMS detection
Corrosion resistant
Hermetic seal
ESD, overload, and reverse wiring protection
Connector options: 2 pin MIL-C-5015, 4 pin M12, integral cable

PDF Spec Sheet(s)

PCC421_99029a.pdf
 


  Model Loop output Full Scale
Tolerance
Low freq High freq Max temp Exit Hazardous
area ?
PCC421VP-05 Velocity Peak   0.5 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    
PCC421VP-10 Popular Velocity Peak   1 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    
PCC421VP-20 Velocity Peak   2 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    
PCC421VP-50 Velocity Peak   5 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    
PCC421VR-05 Popular Velocity RMS   0.5 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    
PCC421VR-10 Velocity RMS   1 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    
PCC421VR-20 Velocity RMS   2 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    
PCC421VR-50 Velocity RMS   5 ips
+/-5%
10 Hz
600 CPM
1.0 kHz
60.0 kCPM
221 °F
105 °C
Side exit    

An orange star(Popular) indicates models most commonly used by industry.

 

Meggitt Sensing Systems, 20511 Seneca Meadows Parkway Germantown, MD 20876
1-800-WILCOXON (1-800-945-2696)    T: 301-330-8811    F: 301-330-8873
-Experiencing problems with our website? Email us at wilcoxon@meggitt.com
Meggitt: smart engineering for extreme environments